#######################################################################
#	IF THIS FILE LOOKS MESSED UP, YOU MAY NEED TO ADD LINE FEEDS
#
#	You may edit this file, however WinAPRS wont recongize the file
#	until the next time you restart
#	Obviously, lines starting with '#' are comments
#
#	! ! ! Fields must be seperated by TAB ! ! !
#
#	NOTE: the default port for TELNET is 23, most APRS servers do NOT
#	use 23, the port MUST be specificed for all of the entries, even
#	if they are port #23
#
#	If your environemnet uses a PROXIE server, uncomment the "PROXIE"
#	line and enter your information. The proxie statement can be anywhere
#	and applies for ALL of the entries.
#
#	NOTE ! ! ! ! !!
#	The PROXIE code has NOT been thoroughly tested, please let me know if it
#	doesnt work.  It will ONLY work IF your proxie simply is looking for
#	"www.aprs.net 10151<CR>", if it needs passwords or anything else, the
#	proxie mode will NOT work
#
#	MANUAL causes WinAPRS to open the terminal window to allow you to
#	interact with the proxie server, PROXIE must be enabled as well
#	This has NOT been tested very much so please be careful and let me know if it works
#
#	WINPROXY causes WinAPRS to try to use a WinProxy proxy server insted
#
#	TELNET causes WinAPRS to try to use a telnet connction via a unix box
#		some firewalls are setup such that you first telnet to one machine
#		then telnet out from it
#######################################################################
#	The file name has CHANGED,
#	This FILE APRServ.txt MUST contain ONLY the names of APRServ machines
#######################################################################
#PROXIE	kb2ear.aprs.net	5071
#PROXIE	xdev.rutgers.edu 23
#MANUAL
#TELNET
#WINPROXY
www.aprs.net	10151	APRServe Network - Southern Florida
second.aprs.net	10151	APRServe Network - backkup
