INSTALL.txt ver 7.6

APRS is distributed on a single 3.5 inch HD disk with these files:

  INSTALL.txt  - This file
  PKUNZIP.exe  - For unzipping APRS (omitted from some disks to make room)
  APRSxxx.zip  - ALL major files.  Builds 6 subdirectories:
                 MAPS - Holds all MAPS     
                 HSTS - History files      SYSTEM - APRS system files
                 BAKS - BACKUP files       README - all README files
                 LOGS - LOG directory      MAPLISTS - all maplists
  
  Xmapsvv.zip  - Regional maps     Emapsxx.zip  - East maps (north east)
                                   Mmapsxx.zip  - Midwest maps
                                   Cmapsxx.zip  - Central Maps
                                   Wmapsxx.zip  - West Maps
                                   SEmapsxx.zip - S.East maps
                                 
*YOU MUST USE A RECENT VERSION (1993) OF PKUNZIP.
*YOU MUST USE THE PKUNZIP -d OPTION TO GET THE APRS SUBDIRECTORIES!

APRS will run on any 8088 through 486 PC with CGA,EGA, or VGA.  BUT NEEDS 
ALMOST 540 K of free memory.  You may have to remove TSR's or reduce 
the requirements of your CONFIG.sys.  APRS will NOT work with non standard 
video cards, for example, the Hercules Video card.  You may make this work 
marginally by running the readily available SIMCGA P program first to
make it simulate a real CGA device.

TO INSTALL APRS on your SYSTEM:               DOS COMMAND
--------------------------------------------  --------------------------------
1.  Create APRS directory on your Harddrive-  MD APRS
2.  Change Directory into that directory   -  CD APRS
3.  Put APRS disk into A and change to A   -  A:
    Do Pkunzip with directories:           -  PKUNZIP -d  APRSvvv.ZIP  C:
    (don't leave off the C: at the end!)
4.  Get the maps for your area             -  PKUNZIP -d  Xmapsvvv.ZIP C:
    (where X is your region, E,C, or W)
5.  Execute APRSxxx                        -  APRSxxx
    a. Give your call and other info as prompted.
    a+ Use MAPS-CHANGE to select your EAS,CEN,WES or SE MAPLIST.xxx
    b. Move cursor to your exact QTH using arrow keys and PgDn (shft-PgDN)
    c. Hit INPUT-MYpos command and answer QTH questions
    d. Use UNPROTO command to set your VIA Digipeater path (needs TNC)
    e. Move and center map to your area of interest and preferred range scale
    f. Save a config file using alt-S-SAVE  (repeat steps e - g at anytime)
    g. Provide your Validation # when requested during the SAVE command.
       (APRS will only ask for the V#'s for your present configuration.)
    
6.  Troubleshooting tips.  READ TROUBLE.txt!
    a. Verify COMMS with TNC using the OPS-COMM-TNC command.
    b. For AEA or KANTRONICS, set EXPert ON or INTFACE TERMINAL in order 
       for the TNC to respond to some APRS commands
    
7.  OPERATING TIPS:
    a. For convenience, you may RENAME the .EXE file to APRS.EXE.  You can
       always find the Version # on the TITLE or HELP screen.
    b. APRS has two command line options:  
       *  APRSxx /b will execute APRS AND load the last BACKUP file
       *  APRSxx /xyz will execute APRS from an alternate config file .xyz
    c. You may customize the TNC commands INITIALIZED and RESTORED by APRS
       in the files named InitTAPR.TNC, InitAEA.TNC and RESTORE.TNC.
       Add commands or use the * to REM out any unused lines. BE CAREFUL,
       APRS will NOT work unless all the parameters are correct.

My distro disk contains the big USA maps and your regional maps.  You must
check with your local BBS or APRS friends for your own STATE maps.  Look 
for  XXmapsVV.zip where XX is your state abbreviation, and VV is the latest 
Version number.  See MAPS.txt for info on additional maps, and MAPMAKIN.txt 
on how to make maps or to customize your MAPLIST.xxx file to your area.

THE LATEST APRS is posted on the 410-280-2503 BBS and FTP.TAPR.ORG/tapr/SIG
/aprssig/upload along with a file similar to 74to74e.zip which will contain 
only the files that changed since the earlier release.  Note that the phone
BBS is NOT MINE, and I AM NOT THE SYSOP.  I rarely check in, so DO NOT SEND 
ME MAIL VIA THAT ROUTE.   Come join the aprssig@tapr.org on the INTERNET! 
and get up to the minute news... ! 

************    REMEMBER TO USE PKUNZIP -d    ***********

UPGRADES:  If you are unzipping an upgraded copy of APRS, or any of the XMAPS.ZIP
files, you can use the command PKUNZIP -dn and only NEW files will be unzipped
into your APRS directories...  Also READ NEWNOTES.txt to see what has changed!

FOR A LIST OF INTERNET and other phone line BBS's known to carry APRS, and
more state maps, see the last paragraph of the README\README.1st file.  It
also announces the APRSsig on the Internet for exchange of ideas on APRS!

READ: README.1st, APRS.txt, HELP.txt, etc

If you want to zoom into other areas of the country, not included on your
distro disk, simply download one of the other map ZIP files, and use the
MAPS-CHANGE command to temporarily load the MAPLIST appropriate
to the new maps.


MINIMUM SYSTEMS:  Despite the 3 Mbyte size of the whole APRS system, a 
minimum system can be built in under 500K with only the .EXE, MAPLIST.xxx, 
at least one .MAP file, and all SYSTEM files.  All directories must be 
at least created even if empty.

DISTRO ON TWO 720K FLOPPIES:  I do NOT do this, but it is easy for YOU to
split the APRS distro disk for sharing with others on TWO-720K disks as
follows:
  1) MD TEMP                           (make a temporary directory)
  2) PKunzip APRSxxx.zip MAPS\*.* TEMP (Unzip just the USA MAPS there)
  3) COPY APRSxxx.ZIP APRShalf.zip
  4) PKZIP -d APRShalf.zip  MAPS\*.*   (DELETE all USA maps from this ZIP)
  5) PKZIP USAMAPS.zip TEMP\*.*        (Zip up all the maps into USAMAPS.zip)
  6) Now copy APRShalf.zip, about 650K onto one disk
         Copy USAMAPS.zip and your regional XmapsYY.ZIP onto the other....
  7) The 720K user then uses PKUNZIP -d on the APRS and Xmaps files
     then he changes into his MAPS directory and does a regular PKUNZIP
     of the USAMAPS.zip file.


