KENWOOD MEMORY CONTROL PROGRAM
MCP-D7G beta Version 0.00

INTRODUCTION
- This program is for editing "Memory Channels", "APRS"(*1), "SKY COMMAND"
  (*2) and various settings on the KENWOOD amateur radio TH-D7AG.
- This program runs on Windows 95 or Windows 98(*3). 
- About 1M bytes of free space on the hard disk is needed to install this
  program.
- At least 5MB of memory is required to run this program.
- To write to or read from the TH-D7AG memory, a separate serial cable 
  (NON MODEM) is required. 
- Before connecting the TH-D7AG to a PC, first turn the TH-D7AG power OFF.
- The latest version of this program can be obtained over the Internet
  from http://www.kenwood.net/.
- Permission is required if this program is to be redistributed on
  individuals' web site.
- Any user may not be engaged in the following acts:
   To revise, change, edit, merge, de-compile or reverse engineer the
   Software.
- THE QUALITY AND PERFORMANCE OF THE PRODUCTS SHALL NOT WARRANT THE
  APPLICABILITY TO THE PURPOSE OF ANY USER. KENWOOD SHALL NOT ASSUME
  ANY LIABILITY FOR THE DEFECT, OR WARRANT ANYTHING OTHER THAN EXPRESSLY 
  PROVIDED IN THE DOCUMENT. THE SELECTION AND INTRODUCTION OF THE PRODUCTS
  AS WELL AS THE RESULTS THEREFROM SHALL BE UPON THE LIABILITY OF THE USERS.
- Kenwood shall own all copyrights and other intellectual properties
  for the Products and all manuals and documents attached to the Products.
  User shall be hereby allowed to use, not sell, the Software packed in
  the Products by Kenwood. While the disc in which the Software is stored
  is possessed by the user, the ownership for the Software itself shall be
  reserved for Kenwood.

INSTALLATION
1. Execute "Setup.exe" and follow the on-screen instructions in the order
   that they appear.
2. When the instruction for selecting country version appears, select
   version in use. If you specify the wrong version, the program will not
   function properly.
3. If you have specified wrong version, repeat the installation procedure
   form the beginning.

UNINSTALLATION
1. Delete MCP-D7G by executing [Control Panel]-[Add/Remove Programs].
2. The files created by MCP-D7G are not delete. Delete those files manually.
3. When files have been linked, delete the [D7G File] by [File Types] in the
   [View]-[Options] menu in the Windows Explorer.


(*1) The Automatic Packet/Position Reporting System(APRS) is a registered
     trademark of Bob Bruninga,WB4APR in the United States.
(*2) The SKY COMMAND is a registered trademark of KENWOOD Corporation in the
     United States or other countries.
(*3) Windows are either registered trademarks or trademarks of Microsoft
     Corporation in the United States and/or other countries.