Hello all...
I have seen many requests for info on how to set up a link via Ethernet and BPQ
I have been using this system for past 9 months and it works fine...
I have on my hard drive a directory called BPQ...
in there you should have all your files that relate to BPQ Node...

Then you should add the Following files to this dir..

LSL.COM
NE2000.COM <<<My card is a NE2000 Compatible..You may change this for
            the Driver for your card..
IPXODI.COM
ODIDRV.EXE
NET.EXE
NET.CFG   << I have invluded this txt file
  

Then add the text from my Node.bat into your Startup Bat file....
also you will have to ADD the Text from my BPQCFG.TXT To your File...

PS..The above setup will only work between BPQ<>BPQ I have not had any need to
use a Full Ethernet Connection between machines and also Between BPQ

Good luck
if you need any help or cannot locate any of the above files let me know
and we can arrange for them to be sent to you...
